Right now, we are focusing on the area where all fixer-upper projects originate: the workshop. It’s a narrow enclosed, uninsulated area that runs the entire length underneath our home, between the pillars that raise us 20 feet above sea level. It houses a furnace, hot water heater, shower, and an old beige beast of a water-treatment contraption which we seriously hope is not treating our water because, if so, it is infusing it with dead-spider and rusted-metal particulate.

What do you do when you don’t have an existing mount to use on your new camera? Well, you have two choices. You either make your own or you use someone else’s. In this case Panasonic chose the latter. Leica has had a long relationship with Panasonic, so it’s no surprise that they have leveraged Leica’s L mount for use on their new camera. The mount is the same mount that can be found on Leica’s SL cameras. If you aren’t familiar with the Leica SL, don’t worry, it wasn’t a very successful camera. Despite having a full frame 24 MP CMOS with 4000 × 6000 pixels with a pixel pitch of 6 × 6 µm² on an active surface area of 24 × 36 mm, a very good electronic viewfinder and shutter, the SL was a sales disaster. Not only was it very expensive ($5995 USD), but the price of the lenses put many a potential customer off. The SL lenses ranged in price from around $4700 USD all the way up to $6395 USD.

The market has also been segmented by end-user applications into irrigation, sewerage, water supply and plumbing and borewell application. Of these, irrigation had the highest revenue share because PVC pipes and fittings are used widely in irrigation systems installed in farms and fields all over the country.

“Folks can say what they want to say, but firefighters are living climate change. It’s staring them in the face every day,” he told the Associated Press.

Global Gas Pipe Fittings Insights, forecast to 2028; presents an extensive assessment including allowing engineering, key trends and market drivers, standardization, technical stadium, setup components, operator case studies, chances, gas pipe fittings prospective roadmap, significance collection, player preferences, and aims. The analysis on the market is considered from the gas pipe fittings development perspective that is futuristic. That is centered on data, and the market circumstances and researchers have examined every form of also the gas pipe fittings participants along with data, as well as principals, as apart from type and regions.

As the new pipe is brought online, the same water management that occurred prior to the tie-in of the new pipe will occur when refilling the tunnel to return to normal flow, so people may continue to see changes to the creek flow during this time, though it won’t last as long as the preparation for the tie-in. The city will continue to work closely with Game, Fish, and Parks as the creek returns to its regular flow and as the hydroelectric plant is brought back online.

John Locarno, global sales and marketing manager, said engineers at Durst and Marathon Electric identified the need for an easy-to-install, space-saving system that required fewer parts and literally no maintenance or setup time compared to current designs. “The conventional hydraulic power drive assembly connects the motor shaft and pump drive by way of a C-face motor adaptor and an external coupling. Direct mounting with the Lectric Drive renders the adaptor-coupler approach obsolete. The pump drive literally becomes part of the electric motor.”

Oh. I didn’t knew that. Uh uh Canon are shooting themselves in the foot… So no R mount for RED for instance? Crazy move.

As for the cost, the adapter is machined out of 4140 steel which is quite harder to work with than the Aluminum that our AR’s are made out of. It also has multiple internal moving parts which have to be inlet for, with tolerances that have to be kept tight to insure proper lockup with repeated use. If you consider the cost of a US machine shop made compensator or brake, I think the price is fairly accurate when you account for the extra machining and parts fitting required to make one of the adapters. It is a purpose driven/Mission specific accessory and a useful one at that, just not one that everyone will want to pay for based on their own personal needs.

Maintenance said they noticed a stress fracture on one of the pipe fittings, where two pipes connect.

12. Porter’s Five Force Analysis of India PVC Pipes and Fittings Market13. Cross Comparison of Major Companies in India PVC Pipes and Fittings Market14. Competitive Landscape of India PVC Pipes and Fittings Market15. Company Profiles of Major Players in India PVC Pipes and Fittings Market15.1. Finolex Industries LimitedPricing Scenario for Finolex Industries Limited15.2. Ashirvad Pipes Private LimitedPricing Scenario for Ashirvad Pipes Private Limited15.3. Supreme Industries LimitedPricing Scenario for Supreme Industries Limited15.4. Astral Poly Technik LimitedPricing Scenario for Astral Poly Technik Limited15.5. Prince Pipes and Fittings Private LimitedPricing Scenario for Prince Pipes and Fittings Private Limited15.6. Jain Irrigation Systems LimitedPricing Scenario for Jain Irrigation Systems Limited15.7. Other Major Companies in PVC Pipes and Fittings Market in India16. India PVC Pipes and Fittings Market Future Outlook and Projections, FY’2019E – FY’2026E16.1. India PVC Pipes and Fittings Market Size, FY’2019E – FY’2026E

No word on autofocus? I think autofocus (stills AND video) might be the big make-or-break feature for this camera, as that’s where Canon and Sony have been making the most rapid progress. It’s hard for people to take a big step back from dual-pixel autofocus, even with cost-savings, 10bit 4:2:2, 4K 60p, better sensor etc. to make up for it.