""I’d like to look at houses that are inhabited," the councilman said. "If the contractor was on that street in September and then (residents) get their money together and they get their water cut back on in October and people left that street, then they didn’t get service." 

The reinforcement of concrete walls in the project area was part of change order 3 for the woodstave penstock replacement project taking place between the Forebay area and standpipes above the Spearfish hydroelectric plant. Courtesy photo

Not only has Panasonic partnered with Leica to make the S1 and S1R, but Sigma is also crashing the party (well more like they are bringing the cake). Leica Camera AG, Panasonic, and Sigma have teamed up to create a strategic partnership called the  “L-Mount Alliance“. This alliance allows Panasonic and Sigma to use the L-mount standard developed by Leica for their own developments and create cameras and optics with this lens mount. This is a big deal for the L-Mount moving forward. By getting three major companies to support it, the L mount is likely to become more accepted and more widely used. If Sigma can bring out a wide range of L mount lenses by the time the new Panasonic cameras become available, it will help push sales. It also means that hopefully, products from all three brands will become cross-compatible.

Designers of industrial hydraulic systems now have this option with the Lectric Drive, offered by Regal Beloit’s Durst Div., Florence, Ky. Unlike conventional boxes for industrial applications, the Lectric Drive does not require an adapter flange and shaft coupling to mate the C-face flange of the pump to that of the motor. Instead, the Lectric connects directly to Regal Beloit’s Marathon brand motors. This convenient setup not only saves space and weight but eliminates the number of components and reduces assembly time.

After using the E-Mount and MFT for the past few years, I find the EF mount very frustrating to work with on cameras like the EVA-1 and C200/C300. There just aren’t that many good Super35 lenses for the EF mount. Canon has the 17-55mm f2.8 but it vignettes in DCI 4K and their 18-80mm is slow (T4.4) and also super expensive. The rest are pretty meh.

Much like the Nikon Z platform, Canon opted for a single memory card slot, which is sure to enrage the masses. Unfortunately, it also kept the same 1.7x crop factor for 4K video shooting that is present in the 5D Mark IV. Since there’s no in-body image stabilization on board, that crop factor can be an issue for vloggers, who may need to shoot wider than the native RF 24-105mm lens will allow. 

Staff members said Runk & Pratt at Liberty Ridge Senior Living Communities is only 4.5 years old with about 200 residents.

Saving space on your pedalboard is a concern for anyone with an effects addiction. And as any sort of modulation junky can confirm, space becomes scarce fast once you delve deep into the many flavors of flange, tremolo, chorus, phase, and vibrato. Ontario-based Southampton Pedals may have a remedy though—at least as far as staple modulation tools go. It’s called, aptly, Utility Knife. And it’s a digital jack-of-all-trades that packs flange, chorus, tremolo, and phaser in a single, super-simple box no bigger than most single-function modulation stomps.

Contact Info:Name: Alex Mathews Email: [email protected] Organization: UpMarketResearch Address: 500 East E Street, Ontario, CA 91764, United States

Canon’s EF->RF adaptor is native, with full electronics. Other manufacturers – if they ever get around to emulating the electronics – would have to reverse engineer it, like Metabones does.

Indeed, but one can design a Speedbooster type where an additional correction lens is included to compensate for the adapter thickness.

The market can be segmented into UPVC, CPVC, HDPE, LDPE, PPR, PPH pipes and fittings and others. Of these, UPVC has accounted for the highest revenue share, followed by HDPE pipes and fittings. The primary growth drivers for the market have been growing sanitation and agriculture sectors in India.The market is at its early growth stage with a large number of organized and unorganized players competing for a share in the market. The market grew at a double digit growth rate during FY’2013 – FY’2018. The primary growth drivers of the PVC pipes and fittings market in India have been rising government investments in irrigation, housing and sanitation through schemes such as Housing for All, AMRUT and PMKSY.