Buttweld Fittings kakaretso

Ho kenngoa ha pipe ho hlalosoa e le karolo e sebelisoang tsamaisong ea liphaephe, bakeng sa ho fetola tataiso, lekala kapa bakeng sa phetoho ea bophara ba phala, 'me e kopantsoeng le tsamaiso ka mochine. Ho na le mefuta e mengata e fapaneng ea li-fittings 'me li tšoana ka boholo bohle le kemiso joaloka pipe.

Li-fittings li arotsoe ka lihlopha tse tharo:

• Li-fittings tsa Buttweld (BW) tseo litekanyo tsa tsona, mamello ea li-dimensional et cetera li hlalosoang ho latela litekanyetso tsa ASME B16.9. Lisebelisoa tse hanyetsanang le ho bola ha bobebe li entsoe ho MSS SP43.
• Socket Weld (SW) fittings Sehlopha sa 3000, 6000, 9000 se hlalosoa ka litekanyetso tsa ASME B16.11.
• Threaded (THD), screwed fittings Class 2000, 3000, 6000 li hlalosoa ho ea ka ASME B16.11 maemo.

Lisebelisoa tse tloaelehileng tsa Buttweld

Elbow 90deg. LR

Lebelo la 45deg. LR

Elbow 90deg. SR

Lebelo la likhato tse 180. LR

Lebelo la likhato tse 180. SR

Theko ea EQ

Ho fokotsa Tee

Reducer Concentric

Reducer Eccentric

Qetellong Cap

Stub End ASME B16.9

Stub End MSS SP43

Lisebelisoa tsa Lisebelisoa tsa Buttweld

Sistimi ea liphaephe e sebelisang li-fittings tsa buttweld e na le melemo e mengata ea tlhaho ho feta mefuta e meng.

• Ho tjheseletsa peipi ho bolela hore ha e dutle ruri
• Mohaho o tsitsitseng oa tšepe o entsoeng pakeng tsa phala le ho kenya o eketsa matla tsamaisong
• Bokaholimo bo boreleli le liphetoho tse lebisang butle butle li fokotsa tahlehelo ea khatello le moferefere le ho fokotsa ts'ebetso ea kutu le khoholeho.
• Sisteme e cheselitsoeng e sebelisa bonyane sebaka

Bevelled E qetella

Lipheletso tsa lisebelisoa tsohle tsa buttweld li behiloe, li feta botenya ba 4 mm bakeng sa tšepe e sa jeleng ea austenitic, kapa 5 mm bakeng sa tšepe e sa hloekang ea ferritic. Sebopeho sa bevel se itšetlehile ka botenya ba sebele ba lebota. Lipheletso tsena tsa bevelled lia hlokahala ho khona ho etsa "Butt weld".

ASME B16.25 e akaretsa ho lokisoa ha lipheletso tsa buttwelding tsa likarolo tsa liphaephe tse tla kopanngoa tsamaisong ea liphaephe ka ho cheselletsa. E kenyelletsa litlhoko tsa li-welding bevels, bakeng sa sebōpeho sa ka ntle le se ka hare sa likarolo tse boima tsa marako, le bakeng sa ho lokisetsa lipheletsong tsa ka hare (ho kenyeletsoa litekanyo le mamello ea boholo). Litlhoko tsena tsa ho lokisoa ha weld edge le tsona li kenyelelitsoe ho litekanyetso tsa ASME (mohlala, B16.9, B16.5, B16.34).

Boitsebiso le Tshebetso

Lisebelisoa tse sebelisoang ka ho fetisisa ho li-fittings tse hlahisoang ke carbon steel, stainless steel, cast iron, aluminium, koporo, khalase, rabara, mefuta e sa tšoaneng ea polasetiki, joalo-joalo.

Ho phaella moo, li-fittings, tse kang liphaephe, ka nako e itseng ka linako tse ling ka hare ho na le lisebelisoa tsa lisebelisoa tsa boleng bo fapaneng ka ho feletseng, e leng "li-fittings" tse nang le lined.

Thepa ea ho kenya e behiloe ha e le hantle nakong ea khetho ea phala, hangata, ho lekana ke ntho e tšoanang le pipe.