Socket End NRS Resilient E lutseng Li-Valves tsa Heke-AWWA C515
Moqapi o tloaelehileng AWWA C515 Lehlaka le sa Tsoheng, le Mameletseng le Lutse Push on ends: E kentse litiiso tsa NBR/EPDM Rubber ho C111 e tloaelehileng (Mefuta e meng ea Flange e fumaneha ka kopo) Fusion Bonded Epoxy Coated Ka hare le Ka ntle ho AWWA C550 Standard Tlhahlobo le tlhahlobo: AWWA C515 Khatello ea ho sebetsa: 250PSI (200 le 300 PSI e fumaneha ka kopo) Mocheso o sebetsang: -20 ℃ ho 100 ℃ (-4 ° F ho 212 ° F) Opereishene:Handwheel,2”Operating Nut,Gearbox
| No | Karolo | Lintho tse bonahalang(ASTM) |
| 1 | 'Mele | DUCLE Iron ASTM A536 |
| 2 | Cheche | Ductile Iron EPDM/NBR Encapsulated |
| 3 | Nate ea Wedge | ASTM ea koporo B124 C37700 |
| 4 | Motsoako | AISI 420 ea tšepe e sa hloekang |
| 5 | Bonnet | DUCLE Iron ASTM A536 |
| 6 | Nate ea Wedge Gasket | Rabara NBR |
| 7 | Lihlatsoa | Nylon/Brass ASTM B124 C37700 |
| 8 | O-ring | Rabara NBR |
| 9 | Khofu | DUCLE Iron ASTM A536 |
| 10 | Nate e sebetsang | DUCLE Iron ASTM A536 |
| 11 | Ring ea Rabara | EPDM/NBR |
| 12 | Bonnet Gasket | Rabara NBR |
| 13 | Bonnet/Gland Bolt | Grand 8 Steel Ka ZINC Plated |
| 14 | Lerole Cap | Rabara NBR |
| 15 | Top Bolts | Tšepe e se nang tšepe AISI304 |
Litekanyo
| intshi | L | H | H1 | D | A | |||||
| mm | intshi | mm | intshi | mm | intshi | mm | intshi | mm | intshi | |
| 2″ | 260 | 10.24 | 305 | 12 | 55 | 2.16 | 62.5 | 2.46 | 88.5 | 3.48 |
| 2.5″ | 273 | 10.75 | 315 | 12.40 | 68 | 2.67 | 75.7 | 2.97 | 90 | 3.54 |
| 3″ | 305 | 12 | 346 | 13.62 | 72 | 2.83 | 92 | 3.62 | 102 | 4.01 |
| 4″ | 348 | 13.70 | 395 | 15.55 | 88 | 3.46 | 118.5 | 4.67 | 107 | 4.21 |
| 6″ | 428 | 16.85 | 520 | 20.47 | 123 | 4.84 | 173 | 6.81 | 140 | 5.51 |
| 8″ | 470 | 18.50 | 595 | 23.43 | 150 | 5.90 | 223 | 8.78 | 155 | 6.10 |
| 10″ | 540 | 21.26 | 720 | 28.35 | 185 | 7.28 | 277 | 10.90 | 170 | 6.69 |
| 12″ | 672 | 26.46 | 797 | 31.38 | 210 | 8.27 | 328 | 12.91 | 230 | 9.06 |
Lifoto tsa tlhahiso
