Socket End NRS Resilient Seated Gate Valves-AWWA C515
Pamantayan sa Disenyo AWWA C515 Non-Rising stem, Resilient Seated Push on ends: Nilagyan ng NBR/EPDM Rubber seal to C111 pamantayan (Iba pang Mga Uri ng Flange na magagamit kapag hiniling) Fusion Bonded Epoxy Coated Panloob at Panlabas sa AWWA C550 Standard Inspeksyon at pagsubok: AWWA C515 Presyon ng Paggawa: 250PSI (Available ang 200 at 300 PSI kapag hiniling) Temperatura sa Paggawa:-20 ℃ hanggang 100 ℃（-4°F hanggang 212°F） Operator:Handwheel,2”Operating Nut,Gearbox
| No | Bahagi | Materyal(ASTM) |
| 1 | Katawan | Malagkit na Bakal ASTM A536 |
| 2 | Wedge | Ductile Iron EPDM/NBR Encapsulated |
| 3 | Wedge Nut | Tanso ASTM B124 C37700 |
| 4 | stem | Hindi kinakalawang na asero AISI 420 |
| 5 | Bonnet | Malagkit na Bakal ASTM A536 |
| 6 | Wedge Nut Gasket | Rubber NBR |
| 7 | Mga tagalaba | Nylon/Brass ASTM B124 C37700 |
| 8 | O-singsing | Rubber NBR |
| 9 | Gland | Malagkit na Bakal ASTM A536 |
| 10 | Operating Nut | Malagkit na Bakal ASTM A536 |
| 11 | Singsing na goma | EPDM/NBR |
| 12 | Bonnet Gasket | Rubber NBR |
| 13 | Bonnet/Gland Bolt | Grand 8 Steel na May ZINC Plated |
| 14 | Dust Cap | Rubber NBR |
| 15 | Nangungunang Bolts | Hindi kinakalawang na asero AISI304 |
Mga sukat
| pulgada | L | H | H1 | D | A | |||||
| mm | pulgada | mm | pulgada | mm | pulgada | mm | pulgada | mm | pulgada | |
| 2″ | 260 | 10.24 | 305 | 12 | 55 | 2.16 | 62.5 | 2.46 | 88.5 | 3.48 |
| 2.5″ | 273 | 10.75 | 315 | 12.40 | 68 | 2.67 | 75.7 | 2.97 | 90 | 3.54 |
| 3″ | 305 | 12 | 346 | 13.62 | 72 | 2.83 | 92 | 3.62 | 102 | 4.01 |
| 4″ | 348 | 13.70 | 395 | 15.55 | 88 | 3.46 | 118.5 | 4.67 | 107 | 4.21 |
| 6″ | 428 | 16.85 | 520 | 20.47 | 123 | 4.84 | 173 | 6.81 | 140 | 5.51 |
| 8″ | 470 | 18.50 | 595 | 23.43 | 150 | 5.90 | 223 | 8.78 | 155 | 6.10 |
| 10″ | 540 | 21.26 | 720 | 28.35 | 185 | 7.28 | 277 | 10.90 | 170 | 6.69 |
| 12″ | 672 | 26.46 | 797 | 31.38 | 210 | 8.27 | 328 | 12.91 | 230 | 9.06 |
Mga larawan ng produksyon
