Buttweld Fittings jikelele

Ukufakwa kombhobho kuchazwa njengenxalenye esetyenziswe kwinkqubo yokubhobhoza, ekutshintsheni isalathiso, i-branching okanye ukutshintshwa kobubanzi bombhobho, kunye nokudibanisa ngomatshini kwinkqubo. Kukho iintlobo ezininzi ezahlukeneyo zokufakelwa kwaye ziyafana kuzo zonke iisayizi kunye neeshedyuli njengombhobho.

Ukufakwa kwahlulwe ngamaqela amathathu:

• Ufakelo lwe-Buttweld (BW) olunemilinganiselo, ukunyamezelwa kwe-dimensional et cetera kuchazwe kwimigangatho ye-ASME B16.9. Ubunzima bokukhanya obunganyangekiyo ku-MSS SP43.
• Ukufakwa kwe-Socket Weld (SW) Udidi lwe-3000, i-6000, i-9000 luchazwe kwimigangatho ye-ASME B16.11.
• I-threaded (THD), i-screw fittings Class 2000, 3000, 6000 ichazwe kwimigangatho ye-ASME B16.11.

Izifakelo zeButtweld eziqhelekileyo

Ingqiniba 90deg. LR

Ingqiniba 45deg. LR

Ingqiniba 90deg. SR

Ingqiniba 180deg. LR

Ingqiniba 180deg. SR

Khangela i-EQ

Ukunciphisa iTee

I-Reducer Concentric

Ukunciphisa i-Eccentric

End Cap

I-Stub End ASME B16.9

Stub End MSS SP43

Usetyenziso lwe-Buttweld Fittings

Inkqubo yemibhobho esebenzisa izifakelo ze-buttweld ineenzuzo ezininzi zendalo ngaphezu kwezinye iifom.

• Ukuwelda into efanelekileyo kumbhobho kuthetha ukuba ayivuzi ngokusisigxina
• Isakhiwo esiqhubekayo setsimbi esakhiwe phakathi kombhobho kunye nokudibanisa songeza amandla kwinkqubo
• Umphezulu ogudileyo wangaphakathi kunye notshintsho oluthe ngcembe lwalathiso lunciphisa ilahleko yoxinzelelo kunye nesiphithiphithi kunye nokunciphisa isenzo somhlwa kunye nokhukuliseko.
• Inkqubo edityanisiweyo isebenzisa ubuncinane bendawo

Beveled Iphela

Iziphelo zazo zonke izixhobo ze-buttweld zenziwe nge-bevelled, zidlula ubukhulu bodonga lwe-4 mm ye-austenitic stainless steel, okanye i-5 mm yentsimbi ye-ferritic stainless. Ubume be-bevel kuxhomekeke kubukhulu bodonga lokwenene. Ezi ziphelo zebevelled ziyafuneka ukuze ukwazi ukwenza "i-Butt weld".

I-ASME B16.25 ibandakanya ukulungiswa kweziphelo zebuttwelding zamacandelo emibhobho ukuze kudityaniswe nenkqubo yemibhobho ngokuwelda. Ibandakanya iimfuno ze-welding bevels, ukubunjwa kwangaphandle nangaphakathi kwamacandelo odonga olunzima, kunye nokulungiselela iziphelo zangaphakathi (kubandakanywa imilinganiselo kunye nokunyamezela komlinganiselo). Ezi mfuno zokulungiselela i-weld edge nazo zibandakanyiwe kwimigangatho ye-ASME (umz., B16.9, B16.5, B16.34).

Izinto eziphathekayo kunye nokusebenza

Izinto eziqhelekileyo ezisetyenziselwa ukufakwa kwezinto eziveliswayo yi-carbon steel, insimbi engagqwali, isinyithi etyhidiweyo, i-aluminium, ithusi, iglasi, i-rubber, iintlobo ezahlukeneyo zeplastiki, njl.

Ukongezelela, ukufakwa, njengemibhobho, ngeenjongo ezithile ngamanye amaxesha ngaphakathi ngaphakathi kuxhotyiswe ngemigangatho yezinto ezisemgangathweni ohluke ngokupheleleyo njengoko zifakela ngokwazo, "eziyi-lined fittings".

Izinto eziphathekayo zokufakelwa zibekwe ngokusisiseko ngexesha lokukhethwa kombhobho, kwiimeko ezininzi, ukulungelelaniswa kwempahla efanayo kunye nombhobho.