Flanged End Swing Priksa Valves-45 Degree Resilient Lenggah-BS5153

Flanged End Swing Check Valves-45 Degree Resilient Seated-BS5153 Gambar Unggulan

Katrangan singkat:

1.Standar: Conforms to BS5153 2.Face to Face conforms to BS EN558-1 Series 10 3.Flange drilled to BS EN1092 4.Material: Cast Iron/Ductile Iron 5.Normal Pressure:PN10/16 6.Size: DN40- Komponen DN400 1 Wesi Cor utawa wesi Ulet 2 Bonet Cast iron utawa Ductile iron 3 Disc Cast iron/Ductile wesi karo NBR utawa EPDM 4 Pin engsel Aplikasi baja tahan karat 1 Pasuryan miturut BS5153(EN558-1 Series 10) 2 Flange drilled accordi...

Kirimi email kanggo kita Kirimi email kanggo kita Ngundhuh minangka PDF

Detail Produk

Tag produk

1.Standar: Selaras karo BS5153
2. Ngadhepi Pasuryan cocog karo BS EN558-1 Seri 10
3.Flange dilatih kanggo BS EN1092
4.Bahan: Besi tuang / Besi ulet
5. Tekanan Normal: PN10/16
6. Ukuran: DN40-DN400

Komponen

1	awak	Cast wesi utawa wesi ductile
2	Bonnet	Cast wesi utawa wesi ductile
3	Disk	Wesi tuang / wesi ulet karo NBR utawa EPDM
4	Pin engsel	baja tahan karat

Aplikasi

1	Adhep-adhepan miturut BS5153(EN558-1 Seri 10)
2	Flange dilatih miturut BS4504 (EN1092-2 PN10/16)
3	Tekanan nominal PN10/PN16

Tes

Tekanan kerja	PN10	PN16
Tekanan cangkang	1,5 MPa	2.4MPa
Tekanan kursi	1.1MPa	1,76 MPa

Ukuran (mm)

DN		40	50	65	80	100	125	150	200	250	300	350	400
L		165	203	216	241	292	330	356	495	622	698	787	914
H			83	90	95	110	135	156	186	214	245	400	430
PN10	D	150	165	185	200	220	250	285	340	395	445	505	565
	PCD	110	125	145	160	180	210	240	295	350	400	460	515
	n-φd	4-19	4-19	4-19	8-19	8-19	8-19	8-23	8-23	12-23	12-23	16-23	16-28
PN16	D	150	165	185	200	220	250	285	340	405	460	520	580
	PCD	110	125	145	160	180	210	240	295	355	410	470	525
	n-φd	4-19	4-19	4-19	8-19	8-19	8-19	8-23	12-23	12-28	12-28	16-28	16-31