Flanged End Swing Check Valves-45Degree Resilient Seated-BS5153

Takaitaccen Bayani:

1.Standard: Yayi daidai da BS5153 2.Face zuwa Fuska ya dace da BS EN558-1 Series 10 3.Flange da aka yi wa BS EN1092 Abubuwan DN400 1 Jikin Cast ƙarfe ko Iron Ductile 2 Bonnet Cast Iron ko Ductile iron 3 Disc Cast Iron / Ductile Iron tare da NBR ko EPDM 4 Hinge Pin Bakin Karfe Aikace-aikacen 1 Fuska zuwa Fuska bisa ga BS5153 (EN558-1 Series 10)

Aika mana imel Zazzage azaman PDF

Cikakken Bayani

Tags samfurin

1.Standard: Yayi daidai da BS5153
2.Face zuwa Fuska ya dace da BS EN558-1 Series 10
3.Flange ya fashe zuwa BS EN1092
4.Material: Cast Iron / Ductile Iron
5.Matsi na al'ada:PN10/16
6. Girman: DN40-DN400

Abubuwan da aka gyara

1	Jiki	Bakin ƙarfe ko ƙarfe baƙin ƙarfe
2	Bonnet	Bakin ƙarfe ko ƙarfe baƙin ƙarfe
3	Disc	Bakin ƙarfe/Baƙin ƙarfe da NBR ko EPDM
4	Ƙunƙwasa fil	Bakin karfe

Aikace-aikace

1	Fuska da fuska bisa ga BS5153(EN558-1 Series 10)
2	Flange da aka tono bisa ga BS4504(EN1092-2 PN10/16)
3	Matsin lamba PN10/PN16

Gwaji

Matsin aiki	PN10	PN16
Harsashi matsa lamba	1.5MPa	2.4MPa
Matsin kujera	1.1MPa	1.76MPa

Girma (mm)

DN		40	50	65	80	100	125	150	200	250	300	350	400
L		165	203	216	241	292	330	356	495	622	698	787	914
H			83	90	95	110	135	156	186	214	245	400	430
PN10	D	150	165	185	200	220	250	285	340	395	445	505	565
	PCD	110	125	145	160	180	210	240	295	350	400	460	515
	n-φd	4-19	4-19	4-19	8-19	8-19	8-19	8-23	8-23	12-23	12-23	16-23	16-28
PN16	D	150	165	185	200	220	250	285	340	405	460	520	580
	PCD	110	125	145	160	180	210	240	295	355	410	470	525
	n-φd	4-19	4-19	4-19	8-19	8-19	8-19	8-23	12-23	12-28	12-28	16-28	16-31